Frequently asked questions about cisco simulators

Current cisco simulators News

“Variance” - Understanding The Balancing Act

Wed, 17 Sep 2008 21:50:20 +0000
This is an extract from a comment left by a visitor to a previous post on this blog:



“i was going through the bsci section and found about load balancing …

i set up a network in gns3 and tested loadbalancing with bandwidth and variance command
what exactly is the difference between those two ? both ...]

How to put an IP address on an Ethernet interface

Mon, 25 Aug 2008 21:19:28 +0000
There are 4 easy steps to accomplish this task.  Remember that you will always need to access the global configuration mode to add interfaces. Let’s walk through these steps together.
First you should connect to your router. You would do this with the enable command.
router> enable            enter
Now we need to access the configurator to use the ...]

Interviews After the Lab Now?

Thu, 28 Aug 2008 23:02:02 +0000
This email has been floating around GroupStudy all day today. It hasn’t been verified by any Cisco employee so this could be all a hoax. Quite a few people seemed to be a little taken back by it. My thought process is what is the big deal? If you truly studied your rear off (which ...]

Type escape sequence to abort.


When using PIM Sparse in NBMA environment like Frame Relay you need to make sure you enter the ip pim nbma command to disable the split horizon rule that traffic coming into the interface is not going out that same interface.

The IP pim nbma is working only for Sparse Mode Group

Candidate RP need to be able to communicate only with the mapping agent and the Routers in the Domain need to be able to communicate with the Mapping agent so from that we can understand that we need to watch our Route to the Mapping Agent.

Ok I think I will end it here for now, I hope this was good info.

IP Expert BLS has arrived

Fri, 05 Sep 2008 18:22:53 +0000
My IP Expert BLS HD turned up today. I did have an evening of some Dynamips labbing planned, and wa

Status Update: 17 - 23 March

Tue, 25 Mar 2008 02:29:27 +0000
I’ll make this update pretty quick as I have already pretty much covered last week’s pro

We hope that the matter available here on cisco simulators prove to be fruitful to you in your mission for enlightenment on cisco simulators.
#



cisco simulators Items For Viewing



Win 10K


ccie lab schedule
ccie lab setup
ccsp | ccsp training | ccvp